Balancing the energy demand by a resource circulation project in Daejeon,Korea

Demand for sustainable renewable energy is on an increase worldwide, whereas the supply is limited. This paper analyses the feasibility of generating electricity and supplying the surplus steam to Daeduk Industrial Complex, by incinerating the combustible municipal waste generated in Daejeon Metropolitan City. The economic feasibility of surplus biogas generated from the anaerobic digestion of food waste and food waste leachate has been analysed. This study estimated resource circulation facility to supply 23,200 m³/day of biogas generated to Daejeon Combined Heat and Power plant. By 2023, it is expected to supply 25.7 tons of steam per hour all year round. The additional steam demand in Daeduk Industrial Complex is estimated as 101,537 tons/year. Surplus biogas will be supplied through an additional 960-m new installation. The cost of biogas is estimated at 30% of the unit biogas production cost. Daejeon Combined Heat and Power plant expects to make 60% additional profit, and Daeduk Industrial Complex and the communities nearby expect to achieve 10% cost savings. It also reduces the dependence of energy on fossil fuels, contributes to national environmental energy policy in reduction in greenhouse gases, creates competitiveness in local business and reduces corporate tax and generates revenue.     

High-resolution modeling and evaluation of ozone air quality of Osaka using MM5-CMAQ system

High-resolution modeling approach is increasingly being considered as a necessary step for improving the monitoring and predictions of regional air quality. This is especially true for highly urbanized region with complex terrain and land-use. This study uses Community Multiscale Air Quality (CMAQ) model coupled with MM5 mesoscale model for a comprehensive analysis to assess the suitability of such high-resolution modeling system in predicting ozone air quality in the complex terrains of Osaka, Japan. The 1-km and 3-km grid domains were nested inside a 9-km domain and the domain with 1-km grid covered the Osaka region. High-resolution Grid Point Value-Mesoscale Model (GPV-MSM) data were used after suitable validation. The simulated ozone concentrations were validated and evaluated using statistical metrics using performance criteria set for ozone. Daily maxima of ozone were found better simulated by the 1-km grid domain than the coarser 9-km and 3-km domains, with the maximum improvement in the mean absolute gross error about 3 ppbv. In addition, 1-km grid results fared better than other grids at most of the observation stations that showed noticeable di erences in gross error as well as correlation. These results amply justify the use of the integrated high-resolution MM5-CMAQ modeling system in the highly urbanized region, such as the Osaka region, which has complex terrain and land-use.     

High-resolution modeling and evaluation of ozone air quality of Osaka using an MM5-CMAQ system

High-resolution modeling approach is increasingly being considered as a necessary step for improving the monitoring and predictions of regional air quality.This is especially true for highly urbanized region with complex terrain and land-use.This study uses Community Multiscale Air Quality (CMAQ) model coupled with MM5 mesoscale model for a comprehensive analysis to assess the suitability of such high-resolution modeling system in predicting ozone air quality in the complex terrains of Osaka,Japan.The 1-km and 3-km grid domains were nested inside a 9-km domain and the domain with 1-km grid covered the Osaka region.High-resolution Grid Point Value-Mesoscale Model μgPV-MSM) data were used after suitable validation.The simulated ozone concentrations were validated and evaluated using statistical metrics using performance criteria set for ozone.Daily maxima of ozone were found better simulated by the 1-km grid domain than the coarser 9-km and 3-km domains,with the maximum improvement in the mean absolute gross error about 3 ppbv.In addition,1-km grid results fared better than other grids at most of the observation stations that showed noticeable differences in gross error as well as correlation.These results amply justify the use of the integrated high-resolution MM5-CMAQ modeling system in the highly urbanized region,such as the Osaka region,which has complex terrain and land-use.     

Seasonal characteristics of SO2, NO2, and CO emissions in and around the Indo-Gangetic Plain

Anthropogenic emissions of sulfur dioxide (SO₂), nitrogen dioxide (NO₂), and carbon monoxide (CO) exert significant influence on local and regional atmospheric chemistry. Temporal and spatial variability of these gases are investigated using surface measurements by the Central Pollution Control Board (India) during 2005–2009 over six urban locations in and around the Indo-Gangetic Plain (IGP) and supported using the satellite measurements of these gases. The stations chosen are Jodhpur (west of IGP), Delhi (central IGP), Kolkata and Durgapur (eastern IGP), Guwahati (east of IGP), and Nagpur (south of IGP). Among the stations studied, SO₂ concentrations are found to be the highest over Kolkata megacity. Elevated levels of NO₂ occur over the IGP stations of Durgapur, Kolkata, and Delhi. Columnar NO₂ values are also found to be elevated over these regions during winter due to high surface concentrations while columnar SO₂ values show a monsoon maximum. Elevated columnar CO over Guwahati during pre-monsoon are attributed to biomass burning. Statistically significant correlations between columnar NO₂ and surface NO₂ obtained for Delhi, Kolkata, and Durgapur along with very low SO₂ to NO₂ ratios (≤0.2) indicate fossil fuel combustion from mobile sources as major contributors to the ambient air over these regions.     

Impact of posture and upper-limb muscle activity on grip strength

Purpose. The current research was carried out to determine grip strength (GS) with change in posture and upper-limb muscle activity of manual workers and investigate the impacts of these changes. Methods. For the current research, 120 male and 80 female participants were selected and GS was assessed using a digital hand grip dynamometer in various conditions. Results. The outcomes showed that male participants had higher GS as compared to female participants. Maximum GS was found in a standing posture with the fixed forward shoulder at 45°, elbow at 90° and a neutral position of the wrist and forearm for all participants. Conclusions. Higher values of GS were attained in standing postures which may result in attainment of higher performance levels by the workers. The outcomes justify the importance of correct postures during manual work in industries employing traditional methods.     

Trace elements in muscle of three fish species from Todos os Santos Bay,Bahia State,Brazil

In this study, an analysis was performed on the concentrations of the trace elements Al, As, Ba, Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb, V, and Zn in muscle of two carnivorous and one planktivorous fish species collected at Todos os Santos Bay (BTS). The accumulation order of the trace elements in Lutjanus analis was Al >Zn >Fe >Cr >Ba >Ni. In Cetengraulis edentulus, the order was Al >Fe >Zn >Cr >Ni >Mn >As. In the species Diapterus rhombeus, the order was Al >Fe >Zn >Cr >Ni >Mn >Cd. To determine the risk related to the consumption of fish, toxicity guidelines were used as standard references. It was observed that the species C. edentulus contained concentrations of As exceeding WHO limits, but these concentrations were acceptable according to the Agência Nacional de Vigilância Sanitária (ANVISA) guidelines. Cd levels were found only in D. rhombeus and in low concentrations according to the determinations of WHO and ANVISA. Pb levels were not detected in any of the three fish species. The analyzed elements did not differ statistically according to the species and feeding habits. The results point to possible risks of human contamination by As related to the consumption of the fish species C. edentulus from the BTS.     

Nanocarriers for drug delivery applications

Environmental Chemistry Letters - Nanobiotechnology research has recently provided numerous basic and applied advances in the health sector. Nanocarriers have been developed for efficient drug...     

Effects of molecular weight and concentration of carboxymethyl cellulose on morphology of hydroxyapatite nanoparticles as prepared with one-step wet chemical method

Nano-sized apatite particles (nAP) synthesized with carboxymethyl cellulose (CMC) have shown great application potentials in in situ heavy metal remediation. However, differences in CMC’s properties effects on the size of nAP produced are not well understood. In this paper, two types of CMC, with respective molecular weights (MW) of ～120000 and ～240000 Dalton or respective polymerization degrees of 500 (CMC-500) and 1050 (CMC-1050), were studied in a concentration range of 0.05%–0.5% (w/w) for nAP synthesis. Morphology of the particles was characterized with transmission electron microscopy (TEM). Results showed that 0.05% CMC-500 solution gave an average particle size of 148.7±134.9 nm, 0.25% CMC-500 solution produced particles of 21.8±20.4 nm, and, 0.5% CMC-500 solution contained particles of 15.8±7.7 nm. In comparison, 0.05% CMC-1050 solution produced nanoparticles of 6.8±3.2 nm, 0.25% CMC-1050 produced smaller nAP of 4.3±3.2 nm, and 0.5% CMC-1050 synthesized the smallest nanoparticles in this study, with an average diameter of 3.0±2.1 nm. Chemical composition of the products was identified with X-ray diffraction (XRD) as pure hydroxyapatite. Interactions between nAP and CMC were discussed with help of attenuated total reflection Fourier transform infrared (ATRFTIR) spectroscopic data. This study showed that CMC at higher concentration as well as higher MW facilitated to produce finer nanoparticles, showing that nAP size could be manipulated by selecting appropriate CMC MW and/or applying appropriate CMC concentration.     

Concentrations of Hchs and Ddts in the Tissues of River Dolphins,Platanista Gangetica,From the River Ganges,India

Abstract

Concentrations of HCH and DDT organochlorine insecticide residues were measured in blubber, muscle and oil samples from three specimens of river dolphins, Platanista gangetica, from the River Ganges, India. Concentrations of HCH and DDT ranged from 94 to 289 ng g^?1 and from 1324 to 9388 ng g^?1 on wet wt. basis respectively. Comparisons are made with other aquatic mammals and other studies on river dolphins. P. gangetica appears to exhibit similar patterns of accumulation with age and with ß-HCH and p-p′-DDE being accumulated to higher levels than other HCH isomers and parent DDT and its other metabolites, respectively. These organochlorines may pose a health risk to river dolphin populations that are already showing evidence of environmental stress. Further studies are recommended.     

Nitrate contamination in water resources,human health risks and its remediation through adsorption: a focused review

The level of nitrate in water has been increasing considerably all around the world due to vast application of inorganic nitrogen fertiliser and animal manure. Because of nitrate’s high solubility in water, human beings are getting exposed to it mainly through various routes including water, food etc. Various regulations have been set for nitrate (45–50 mgNO₃^?/L) in drinking water to protect health of the infants from the methemoglobinemia, birth defects, thyroid disease, risk of specific cancers, i.e. colorectal, breast and bladder cancer caused due to nitrate poisoning. Different methods like ion exchange, adsorption, biological denitrification etc. have the ability to eliminate the nitrate from the aqueous medium. However, adsorption process got preference over the other approaches because of its simple design and satisfactory results especially with surface modified adsorbents or with mineral-based adsorbents. Different types of adsorbents have been used for this purpose; however, adsorbents derived from the biomass wastes have great adsorption capacities for nitrate such as tea waste-based adsorbents (136.43 mg/g), carbon nanotube (142.86 mg/g), chitosan beads (104 mg/g) and cetyltrimethylammonium bromide modified rice husk (278 mg/g). Therefore, a thorough literature survey has been carried out to formulate this review paper to understand various sources of nitrate pollution, route of exposure to the human beings, ill effects along with discussing the key developments as well as the new advancements reported in procuring low-cost efficient adsorbents for water purification.